Page 1
ASSEMBLY INSTRUCTIONS SLEEP STATION - CHEST IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR SLEEP STATION CHEST. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE HEALTH & SAFETY: DO NOT jump on this item. DO NOT use this item if any parts are missing, damaged or worn.
Page 3
Parts List for Chest Hardware List for Chest (found in box 5) Part Description Part Description Top Panel Wooden Dowel Left Panel Wooden Dowel Right Panel 3.5 x 30 mm Screw Centre Panel 3.5 x 16 mm Screw Base Panel 4 x 35 mm Screw Top Plinth Tack...
Page 4
Step 2: Insert hardware parts A, B and J as shown using a small mallet (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 3: Assemble the drawer components using hardware parts C, D, E and G with a screwdriver (not provided).
Page 5
Step 5: Attach the left panel (2) using hardware parts C and D with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 6: Attach the base plinth (7) using hardware part D, then attach the plinths (8) using hardware part C. You will need to use a screwdriver (not provided).
Page 6
Step 7: Attach the right panel (3) using hardware part C and D, then attach hardware part H using hardware part D. You will need to use a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 8: Attach the top panel (1) using hardware part C and a screwdriver (not provided).
Page 7
Step 9: Connect the back panels (16) with the spine (17) and secure in position using hardware part F and a small mallet (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 10: Insert the shelf (10) and the assembled drawers.
How to Remove Drawers if Required: To unlock, locate the drawer and turn the drawer stopper 180 degrees. To lock, turn the drawer stopper 180 degrees. Additional Information: Page 8 of 8...