Kenmore Stratus DS1030 Use & Care Manual page 9

WARNING
Before charging make sure the unit is
turned OFF.
1. Insert the plug insert into the charging
adapter body. Align the support rails
located on the charging adapter body
with the guide rails on the plug insert.
Slide the plug insert fully towards the
charging adapter body to lock into
place until you hear a click.
NOTE:
To remove the plug, press the
release latch on the charging adapter
and slide the plug insert off the charging
adapter body.
2. Insert the charging adapter into the
charging port located on the bottom of
the charger base and secure the cord as
illustrated.
CHARGING
Plug Insert
Release
Latch
3. Insert the vacuum cleaner onto the
support rails of the charger base. Ensure all
connections are clean and free of dirt.
4. Make sure the vacuum cleaner is fully
charged before using for the first time.
The vacuum may take up to 5.5 hours to
charge completely if fully discharged.
5. Plug the charging adapter into a wall
outlet.
- 9 -