Software Loading - Sharp LC32GD7E Service Manual

Software loading

1 Update of the main software (operating soft-
ware)
To update the software you need the „Programmer"
(Article number 87933.050) and the update pro-
gram „Flasher".
Please act according the following procedure:
- Switch off the TV set with the mains switch.
- Connect the Programmer with the L-Link cable to
the service socket at the TV.
- Start the Flasher software and select „Step 2"
(see fi g. 1).
fi g. 1
- Switch on the TV set with the mains switch now
(TV does not switch on under this condition) - see
fi g. 2.
fi g. 2
- Software automatically jumps to „Step 3"
- Now select „Auto program" (see fi g. 3) ...
fi g. 3
...and select the new software version (see fi g. 4).
fi g. 4
With selecting „Open" the update process will start
automatically (see fi g. 5).
fi g. 5
- With the message „Flash programmed" the up-
date is fi nished (fi g. 6).
fi g. 6
- Switch off the TV with the mains switch and dis-
connect the L-Link cable.
18