NOTES:
● The time code cannot be reset.
● During fast-forwarding and rewinding, the time
code indication does not move smoothly.
● The time code is displayed only when "TIME
CODE" is set to "ON". (
Quick Review
Enables to check the end of the last recording.
1) Press QUICK REVIEW during the Recording-
Standby mode.
2) Tape is rewound for about several seconds
and played back automatically, then pauses in
the Recording-Standby mode for the next shot.
● Distortion may occur at start of playback. This is
normal.
Recording From The Middle Of A Tape
1) Play back a tape or use Blank Search
(
pg. 20) to find the spot at which you want to
start recording, then engage the Still Playback
mode. (
pg. 20)
2) Set the Power Switch to "REC" while pressing
down the Lock Button located on the switch,
then start recording.
pg. 24)
VIDEO RECORDING
19
EN