Honeywell HCM-800 User Manual page 3

SETTING UP YOUR HUMIDIFIER (CONT'D)
Placement
Step 1
Fill Tank
Step 1
Remove the water tank
Step 3
Fill tank with cool tap water.
Replace tank cap. Tighten by
turning clockwise
Place tank back on humidifier.
Power
Step 1
HCM-800_OM.indd 3
Select a firm, level location at least 6" (15cm) from any walls
for proper airflow. Place the humidifier on a water-resistant
surface, as water can damage furniture and some flooring.
Kaz will not accept responsibility for property damage caused
by water spillage.
Step 2
Turn tank upside-down.
Remove tank cap by turning
counter- clockwise
Step 4
Once the filled water tank has
been placed on the unit do not
move humidifier. Doing so could
.
cause leakage and spills.
With the power switch in the OFF position, plug the
filled humidifier into a polarized 120V outlet. DO NOT
FORCE THE POLARIZED PLUG INTO THE OUTLET; it will
only fit one way.
DO NOT plug in humidifier with wet hands to
avoid electric shock.
.

4/5/07 12:06:41 PM