Panasonic Omnivision PV-C2061 Operating Instructions Manual page 19

* Important: if a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.
1:00 (one minute)
2:00
3:00
9:00
10:00
15:00
20:00
25:00
30:00
40:00
50:00
60:00 (Max)
Note
While timer function is in progress,
you can change channels on the
unit with CH while "CANCEL/
SET" screen is not displayed.
SLEEP TIMER
This unit can be set for auto power off.
Press SLEEP repeatedly
to set SLEEP TIMER.
• Pressing DISPLAY with
sleep timer set displays
remaining time.
Press SLEEP repeatedly
until "SLEEP TIMER 00"
appears to cancel.
INSTANT ALARM
You can set a timer alarm up to 60 min. Useful when
you are cooking, etc.
1
2
one-minute
increase
until 10:00
five-minute
increase
To cancel, press TIMER/FM then press ADD/DLT on
until 30:00
the remote while CANCEL/SET screen is displayed.
To increase timer in progress, repeat step 2. Time
will be rounded up to next 1, 5, or 10 minute interval.
ten-minute
increase (See chart left.)
until 60:00
<Example>
• If current time remaining is 12:15, countdown will
restart from 15:00.
• If current time remaining is 9:15, countdown will restart
from 10:00.
3
Press TIMER/FM on the unit to display
the instant alarm CANCEL/SET screen.
5 : 20PM
CANCEL : ADD / DLT 02 : 00
SET : CH KEY ON UN I T
Remaining Time
• Pressing TIMER/FM repeatedly on the unit
will change display as follows.
Alarm will sound at 0: 00.
Press any button to stop
• The volume of the alarm gradually increases for
one minute and then continues to beep until
any button is pressed.
SLEEP TIMER 30
SLEEP TIMER 60
SLEEP TIMER 90
SLEEP TIMER 00
Press CH on the
unit with CANCEL/SET
screen displayed to set
alarm.
(Time changes in
the order shown left.)
19