Advertisement
Bluetooth Wireless
Pairing & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by the user
or erased due to a reset of the device. If your device should become unpaired or
you find it is unable to connect, repeat the steps listed here.
1.
When powered ON, a chime will sound, indicating the unit is ready to pair
with your device. When pairing, remain within 3 feet of the unit.
2.
Using the controls on your Bluetooth device, scan for and select ISBW322
in your Bluetooth settings to pair. Refer to the user's manual for your specific
device for instructions on pairing and connecting Bluetooth devices.
3.
When successfully paired, the display will turn solid, a voice will announce
"Bluetooth connected. "
4.
Use the controls on the connected device to select and begin playing audio.
Audio played through the connected Bluetooth device will now be heard
through the speaker. Use the controls on the speaker or the connected
device to play, pause, and adjust volume. Note: If your device should
become unpaired or you find it is unable to connect, press & hold the
button on to enter pairing mode manually.
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l'utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d'assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User's Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2022 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
ISBW322-2896-01-IB.indd 2
Water Resistance Level IPX7
• Suitable for indoor and outdoor use in the presence of incidental or light
exposure to splashing water, rain, or snow.
• This speaker can be submerged in up to 1m of water for approximately 1
minute and 30 seconds.
IMPORTANT: To ensure your speaker is prepared for use in a wet environment,
disconnect and remove any power cables, and tightly close the DC Power Input
waterproof cover. If the water cover is not properly closed, water resistance will be
compromised and could result in damage to the speaker or personal injury.
WARNING: DO NOT CHARGE THE SPEAKER OR A MOBILE
DEVICE WHILE IT IS NEAR WATER OR IF IT MAY GET WET.
ALLOW AMPLE TIME TO DRY AFTER BEING SPLASHED.
Customer Support
Made
Green
Protect for Today
Sustain for Tomorrow
15/12/2021 9:28:00 AM
Advertisement
