9.4.2. Assembly
(Step1)
Insert the front part of the key into the chassis.
(Step2)
Insert the plate spring into the hammer notch (refer to
(Step3)
While slowly lowering the key into the chassis, insert the plate spring into the notch at the rear
of the key (refer to
[Fig.
(Step4)
Carefully insert the key into the opening in the chassis and slide the key towards the rear to lock
it in place (refer to
[Fig.
9.5. Disassembly of the pedal assembly
(Step1)
Remove the pedal assembly from the pedal box.
(Step2)
Disassemble the pedal assembly (refer to
5]).
5]).
[Fig.
[Fig.
5]).
[Fig. 5]
6]).
[Fig. 6]
9