Communication Settings - Hitachi CP-X2010N User Manual – Operating Manual

Network Bridge Communication

Communication settings

For communication setting, use the OPTION - SERVICE - COMMUNICATION
menu. ( &
OPTION menu - SERVICE - COMMUNICATION in the User's Manual
- Operating Guide)
Item
BAUD RATE
Data length
PARITY
Start bit
Stop bit
Transmission method
NOTE • For connecting the projector to your devices, please read the
manual for each devices, and connect them correctly with suitable cables.
• Turn off (the power of ) both the projector and other devices and unplug ,
beore connecting them.
• For details of Transmission method, refer to 3.8.4 Transmission method-
Network Guide.
16
4800bps / 9600bps / 19200bps / 38400bps
8 bit (fixed)
NONE/ODD/EVEN
1 bit (fixed)
1 bit (fixed)
HALF-DUPLEX/FULL-DUPLEX
Condition