Connecting The Chassis To Ground - Cisco UBR10012 Quick Start Manual

Installing the Chassis
Note
Figure 11
1
1

Connecting the Chassis to Ground

Connecting the Cisco uBR10012 router chassis to earth ground is required for all AC or DC-powered
installations. Ensure that you have the recommended tools and supplies available before you begin this
procedure.
Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024.
Cisco uBR10012 Series Universal Broadband Router–Quick Start Guide
28
Figure 11 shows the chassis flush-mounted at the rear. The procedure is identical for the front
mounting method.
Installing the Chassis in a Rack using the Rear Mounting Brackets
1
Rear mounting brackets
1
—
OL-24972-01