JVC AV-36D503/Y Service Manual page 31

PIP CIRCUIT ADJUSTMENT [Only for AV-36D503]
Measuring
Item
instrument
PIP WHITE Signal
BALANCE gener ator
adjustment
(HIGH LIGHT)
Remote
control unit
PIP DISPLAY Signal
POSITION gener ator
adjustment
Remote
control unit
Ad justment position
UPPER WIDTH
LOWER WIDTH
LEFT WIDT H
RIGHT WIDTH
92%
H SIZE adjustment value
PIP S CREEN
80%
Test point Ad justment part
PIP08 R DRIVE
PIP10 B DRIVE
[PIP(PIP) mode]
PIP11 L POSI
PIP12 R POSI
PIP13 UPR POSI
PIP14 LWR POSI
[PIP(PIP) mode]
Ad justment value
Screen size
80%
80%
80%
80%
80%
80%
92%
V SIZE adjustment value
80%
1. Receive the black and white signal (c olor off).
2. Select the 5 PIP mode from SERVICE MENU.
3. Select the PIP08 R DRIVE, PIP10 B DRIVE of the PIP mode.
4. Confirm the initial setting values of PIP08 and PIP10.
5. Adjust the PIP08 R DRIVE, PIP10 B DRIVE until the screen
becomes white.
Ad justment item
PIP08 R DRIVE
PIP10 B DRIVE
1. Receive the black and white signal (c olor off).
2. Select the 5 PIP mode from SERVICE MENU.
3. Select the PIP11 L POSI of the PIP mode.
1. Confirm the initial s etting value of the PIP11 L POSI～PIP14
LWR POSI.
5. Adjust the PIP11 ～ PIP14 to become the each PIP screen
outside edges positioned about the left mentioned values from
screen edge.
Ad justment item
PIP11 L POSI
PIP12 R POSI
PIP13 UPR POSI
PIP14 LWR POSI
No. 51948
AV-36D503
AV-36D303
AV-36D203
Description
Initial setting value
63
65
Initial setting value
22
15
12
11
31