Related Manuals for Hawking HWPG1
Summary of Contents for Hawking HWPG1
- Page 1 HWPG1 Hawking Technologies, Inc.
- Page 2 HWPG1 Hawking Technologies, Inc.
- Page 3 HWPG1 Hawking Technologies, Inc.
-
Page 4: Software Installation
NOTE: DO NOT INSTALL THE PCI CARD YET. Insert the Installation CD into to your CD-ROM Drive. When an autoloader screen appears, click on the “Driver & Utility Setup” to initiate the installation. The installation is preparing to setup. HWPG1 Software Installation Hawking Technologies, Inc. - Page 5 Click “Yes” to process the installation if you accept the license agreement. Choose “Hawking Configuration Tool” and click next. HWPG1 Hawking Technologies, Inc.
- Page 6 The system will automatically detect the card and display “Hardware Installation” screen. Click “Continue Anyway” to continue. Please wait while the HWPG1 is configuring your software installation. At this point please click “Finish” and move on to the Hardware installation.
- Page 7 Installation Part II: Hardware Installation HWPG1 Hawking Technologies, Inc.
- Page 8 Hardware Installation Cont’d For better performance, the HWPG1 is compatible with Hawking Hi-Gain Antennas and can be easily upgraded. Simply remove the original dipole antenna from the back of your computer and replace it with one of the Hi-Gain antennas (note: Hi-Gain antenna must be purchased separately).
- Page 9 Select “Install the software automatically [Reconmmended]” and click “Next.” 2. Please wait while the wizard searches. The Found New Hardware Wizard will automatic install the software. 3. Now, you have completed the software installation. Select Finish. HWPG1 Hawking Technologies, Inc.
-
Page 10: Using The Wireless Configuration Utility
After you have successfully installed the Wireless-G PCI Card, a Network Status icon should display in your Windows task bar. Double click it to execute the Utility. If it does not appear, you can find it in your Programs Menu: HWPG1 Hawking Technologies, Inc. - Page 11 Note: If your scan provides no wireless networks, double check to see if your wireless network is set up correctly. If the problem persists, check with your wireless AP/Router manufacturer’s technical support department. HWPG1 your Hawking Technologies, Inc. P 10...
- Page 12 You can select to use the XP’s built-in utility with full WPA function. If “Use XP Wireless Zero Configuration” is selected, you can only configure the advance setting or check the link status and statistics from the “RaConfig” utility. HWPG1 Hawking Technologies, Inc. P 11...
- Page 13 4. You must enter the network security key in use by your wireless network. Check with your network administrator if you do not know this information. Note: Uncheck “Use Windows to Configure my wireless network settings”, the “RaConfig” utility will be enabled again. HWPG1 Hawking Technologies, Inc. P 12...
- Page 14 Mode) enables higher throughput than IEEE 802.11g standard (Up to 54Mbps). Go to your Wireless Utility Advanced tab Select Turbo Mode --> Apply For more advanced settings (i.e. setting up a static IP address, etc.), please refer to the User’s Manual on the CD. HWPG1 Hawking Technologies, Inc. P 13...
- Page 15 A Unique name identification for your wireless network. All wireless devices must have the same ID or else they will not work together. Channel A Channel that all Wireless devices communicate on. All Wireless devices on the network must be set on the same channel to work together. HWPG1 Hawking Technologies, Inc. P 14...
- Page 16 HWPG1 Hawking Technologies, Inc. P 15...