7.9
Print Server Cfg – Print Server Network
Ability Setting
The Print Server Cfg page allows you to set:
The Diagnostic Printout, which determines whether or not
a diagnostic printout should be printed on the printer to
which the print server is connected.
The TCP/IP Support button, determines whether or not
the TCP/IP network printing protocol is supported
The NetWare Support button, determines whether or not
the NetWare network printing protocol is supported
The NetBEUI Support button, determines whether or not
the NetBEUI network printing protocol is supported
The Write button: saves the configuration to the print
server.
The Reset button: resets the print server to let the
changes take effect.