English
:
Cut deeper into the parting cut with
uniform back-and-forth movements,
starting at the top and moving out
towards the sides. Advance the
cutting wheel along the guiding
groove at full cutting depth. Always
reposition the cutting wheel afresh,
taking care not to wedge it if the
cutting direction has to be corrected
slightly. If necessary, leave small
ridges to hold the severed part in
position. These ridges can
subsequently be broken off.
16
STIHL composite resin
cutting wheels
Economic benefit is assured and
premature wear avoided by choosing
and using the correct composite resin
cutting wheel. The short name
–
on the label and
–
on the packaging (table with
recommended uses)
can help to ensure the correct choice.
STIHL composite resin cutting wheels
cannot be used to cut railway tracks.
STIHL diamond cutting
wheels
Economic benefit is assured and
premature wear avoided by choosing
and using the correct diamond cutting
wheel. The short name
–
on the label and
–
on the packaging (table with
recommended uses)
can help to ensure the correct choice.
TS 700, TS 800