Table of Contents
Advertisement
• Step 4. Display the Initial Settings:
While pressing [ MENU/SET ] button and "[ RIGHT ] of Cursor buttons" simultaneously, turn the power off.
The "Initial Settings" menu is displayed.
There are two kinds of "Initial Settings" menu form as follows:
[ CASE 1. After replacing Main P.C.B. and/or Flash-ROM ]
[ Except "EB/EF/EG/EP" models: (SEP0093AA is used as a Main P.C.B.) ]
When Main P.C.B. has just been replaced, 6 model suffixes are displayed as follows. (Two pages in total)
[ Only "EB/EF/EG/EP" models: SEP0093AB is used as a Main P.C.B. ]
When Main P.C.B. has just been replaced, only 4 model suffixes are displayed as follows. (One page in total)
[ CASE 2. Other than "After replacing Main P.C.B. and/or Flash-ROM" ]
• Step 5. Choose the model suffix in "Initial Settings": (Refer to "CAUTION")
[ Caution: After replacing Main P.C.B. and/or Flash-ROM ]
The model suffix can been chosen, JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can not be changed.
Therefore, select the area carefully.
Select the area with pressing "[ UP ] / [ DOWN ] of Cursor buttons".
14
Advertisement
Table of Contents
