Storing The Appliance; Servicing The Appliance - Salton SCGK60E Instructions And Warranty

Illuminating glass kettle
Table of Contents

Advertisement

Cleaning the filter:
The filter is located inside the kettle behind the spout.
With the lid open, gently pull the filter out of its retaining slot.
Lift the filter out of the kettle.
Rinse the filter in warm water and gently remove any scale with a soft brush.
To replace the filter, slide it down into its slot until it clicks into place.

STORING THE APPLIANCE

Unplug the unit from the wall outlet and clean all the parts as instructed above. Ensure that all
parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet or dirty.
Never wrap the power cord around the appliance.

SERVICING THE APPLIANCE

There are no user serviceable parts in this appliance. If the unit is not operating correctly, please check
the following:
You have followed the instructions correctly
That the unit has been wired correctly and that the wall socket is switched on.
That the mains power supply is ON.
That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the problem and
you need to return the appliance, make sure that:
The unit is packed carefully back into its original packaging.
Proof of purchase is attached.
A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised service agent,
in order to avoid any hazard. If service becomes necessary within the warranty period, the appliance
should be returned to an approved Tedelex Trading (Pty) Limited service centre. Servicing outside the
warranty period is still available, but will, however, be chargeable.
6

Advertisement

Table of Contents
loading

Table of Contents