Philips Sonicare DiamondClean 9000 Manual page 18

18 English
4 The charger will charge your toothbrush until it is fully charged.
The handle is charging when the battery indication is blinking white. When the
handle is fully charged, the battery indication illuminates white for 30 seconds
and then turns off.
Note: Your handle comes pre-charged for first use. After first use, charge for at
least 24 hours.
Charging with the travel case*
*Note: The charging travel case may not be included depending on the model
purchased.
1 Take the USB cable from the bottom of the charging travel case.
2 Connect the charging travel case to 5V DC input power either from:
- The USB adapter provided
- a UL-listed or certified to ANSI/UL 60950-1 personal computer's
standard USB connector or,
- a UL-listed or certified to ANSI/UL 60950-1 LPS power supply with USB
output port or,
- a UL-listed or certified 1310 Class 2 power supply.
Important: The wall adapter must be a safe extra low voltage source,
compatible with the electrical ratings marked on the bottom of the
device.
3 The travel case charges your toothbrush until your toothbrush is fully
charged.