Hauppauge WinTV-PVR-150 Connection Manual page 3

Here is a picture of the A/V Cable Set installed with a WinTV-PVR-500MCE:
For the WinTV-PVR 150/500 (500 MCE shown above) connect the jumpers to pins 2-3
& 4-5 on the A/V Cable Set between the A/V header and audio/video inputs.
Tip: Removing the 6" cable from the A/V board will make it easier to access the
jumpers:
Jumpers 1-2 & 3-4 for the 250/350 boards
Jumpers 2-3 & 4-5 for the 150/500 boards
Thank you, Your Hauppauge Team
Sales: sales@hauppauge.com
Web site: www.hauppauge.com
October 13, 2005
3