GE Dash Port 2 Service Manual page 39

Revision A
Installation: Setup/Configure
Manual Adjustment
1. Power up the monitor and the remote display.
2. From the monitor, select MORE MENUS > PATIENT DATA >
VITAL SIGNS.
3. Verify the Vital Signs NRT displays correctly on the remote display.
Bad Remote Display Image - Blurry or Cut-Off Image
4. If the Vital Signs NRT does NOT display correctly on the remote
display, complete the following tasks:
a. Display the Vital Signs NRT on the monitor and on the remote
display.
b. Complete an auto-adjust (auto-tune) procedure as described in
the documentation provided with the remote display.
Dash Port 2 Docking Station
2000966-138
041A
3-13