Playback A Tape; Record On A Tape - Panasonic PVQ-1312W Service Manual

Playback a Tape

Ready Check List
All connections are made.
Your unit is plugged in.
1
Record
tab
To prevent tape jam,
remove loose or peeling
labels from tapes.
2
Press PLAY*
• Playback begins if cassette has no record
tab.
I Forward/Reverse scene search
=> Press FF or REW
=> Press again or PLAY to release.
I Still (Freeze) picture
=> Press PAUSE/SLOW
=> Press PLAY to release.
I
Slow Motion picture
=> Hold down PAUSE/SLOW in
Still mode
=> Press PLAY to release.
I
Frame by Frame picture
=> Press PAUSE/SLOW in Still mode
=> Press PLAY to release.
Notes
• These features work best in SLP mode.
• After the unit is in Still or Slow mode for 3
minutes, it will switch to Stop mode automatically
to protect the tape and the video head.
I Stop => Press STOP
I Rewind tape => Press REW in Stop mode
I Fast forward tape => Press FF in Stop mode
I Eject tape => Press EJECT on the remote or
STOP/EJECT on the unit
You can operate on the unit
CH
Insert a cassette.
POWER POWER
VIDEO IN VIDEO IN AUDIO IN AUDIO IN
Press to stop and/or eject tape
12
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Insert a cassette.
• The unit power comes
on automatically.
PLAY
REC
VOL VOL CH CH STOP/EJECT REW/ STOP/EJECT REW/ PLAY/REPEAT FF/ PLAY/REPEAT FF/ REC TIMER/FM REC TIMER/FM
REC ON TIMER PROG TIMER REC ON TIMER PROG TIMER
ACTION ACTION
REC Indicator

Record On a Tape

1
Insert a cassette with record tab.
• The unit power comes on automatically.
2
Press CH
to Select Channel.
• For "LINE" input, see bottom of next page.
3
Press SPEED to select recording
speed
(see page 4).
SP = Standard Play
LP = Long Play
SLP = Super Long Play
• Selected speed is displayed.
4
Press REC to start recording.
• To edit out unwanted portions, press
PAUSE/SLOW to pause and resume
recording.
• You cannot view another channel during
recording.
I Stop => Press STOP
I One Touch Recording (OTR)
Press REC repeatedly
to set the recording
length (30 min - 4 hours).
• The unit stops recording at a preset time.
• PROG TIMER indicator lights on the unit.
Notes
• After the unit has been in Rec Pause mode for
5 minutes, it will stop automatically to protect
the tape and the video head.
• The remaining recording time of an OTR can be
displayed by pressing DISPLAY.
Model PV-C2062
remote shown.
or number keys
Normal Rec 0:30 1:00
4:00 3:00 2:00 1:30