Electric Brake - Makita XRJ04 Instruction Manual

B
1. Lock-off button 2. Switch trigger
the lock-off button is provided.
and pull the switch trigger.

Electric brake

consistently fails to quickly stop after the switch trigger
is released, have the tool serviced at a Makita service
center.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Installing or removing the recipro
saw blade
CAUTION:
Always clean out all chips or for-
eign matter adhering to the blade and around the
blade clamp.
is in released position
inserting the recipro saw blade. If the blade clamp lever
direction of the arrow so that it can be locked at the
released positon .
1
2
on the insulation cover before
A
1. Blade clamp lever 2. Released position 3. Fixed
position
Insert the recipro saw blade into the blade clamp as far
the recipro saw blade. Make sure that the recipro saw
blade cannot be extracted even though you try to pull
it out.
1. Recipro saw blade 2. Blade clamp sleeve
CAUTION:
blade deep enough, the recipro saw blade may be
ejected unexpectedly during operation.
be extremely dangerous.
pro saw blade is removed and the blade clamp lever is
1. Recipro saw blade 2. Blade clamp lever
6 ENGLISH
1
2
2
If you do not insert the recipro saw
.
2
1
3
1
-