Table of Contents
Advertisement
3. How to Eject Manually
1. Remove the Rear Cabinet.
2. To remove the Loader PCB Holder with the DVD
Main CBA Unit, remove three screws (S-7) in Fig.
D2. Do not disconnect connectors.
3. To remove the Chassis Cover, remove 4 screws A
as shown in Fig. D5.
4. Remove a disc.
Reassembly note of the Chassis Cover:
1. Insert the pin A on the Chassis Cover into the hole
A on the Main Chassis as shown in Fig. D6.
Pin A
Hole A
2. Tighten 4 screws A as shown in Fig. D5.
Chassis Cover
Disc
Screws A
Fig. D5
Chassis Cover
Main Chassis
Fig. D6
5-6
L3150DC
Advertisement
Table of Contents
