Table of Contents
Advertisement
Quick Links
AssEMbLy, AND OpErAtiON iNstructiONs
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight tools
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
sAVE tHis MANuAL.
©
Copyright
2007 by Harbor Freight Tools
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
DOG KENNEL
6' X 6' X 4'
Model
3491 Mission Oaks Blvd., Camarillo, CA 93011
96695
®
. All rights reserved. No portion of this
®
.
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools 96695
Summary of Contents for Harbor Freight Tools 96695
- Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353.
-
Page 2: Important Safeguards
When using electrical appliances, safety precautions should always be followed including the following: Work Area safety Keep work area clean, well-lit, and free of obstructions and other debris. Make sure there is adequate surrounding workspace during assembly. SKU 96695 For technical questions, please call 1-800-444-3353. Page 2... -
Page 3: General Safety
It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. sAVE tHEsE iNstructiONs. SKU 96695 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: Specifications
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. - Page 5 Support Post is 35-1/2” before tightening Clamps with Large Carriage Bolts (6) Once all the Carriage Bolts have been tightened, untie the Large Chain-Link Fencing (1). caution! Avoid sharp ends and tangles while untying the roll. SKU 96695 For technical questions, please call 1-800-444-3353. Page 5...
-
Page 6: Gate Assembly
And as with the Large Chain-Link Fencing, be sure to pull tight and remove any slack. please note: You may also need to cut off the extra Small Chain-Link Fencing from the roll. Again, follow the same instructions regarding the Large Chain-Link Fencing. SKU 96695 For technical questions, please call 1-800-444-3353. Page 6... - Page 7 Post (3), with the slot end facing UP. See Figure D, on next page. Make sure the location does not allow any of the Clips (7) to interfere with the Latch’s operation. SKU 96695 For technical questions, please call 1-800-444-3353. Page 7...
- Page 8 Repeat the same lacing procedure with the bottom frame. Remember to place the Kennel on a large box or on cement blocks to allow for easier lacing of the bottom frame. SKU 96695 For technical questions, please call 1-800-444-3353. Page 8...
-
Page 9: Operation
Regularly check to make sure the Kennel’s Flip Latch (15) is working properly and that the Gate remains shut when the Flip Latch is used. SKU 96695 For technical questions, please call 1-800-444-3353. Page 9... -
Page 10: Please Read The Following Carefully
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 96695 For technical questions, please call 1-800-444-3353. Page 10... -
Page 11: Assembly Diagram
AssEMbLy DiAGrAM SKU 96695 For technical questions, please call 1-800-444-3353. Page 11...