Harman Kardon SIGNATURE 2.1 Owner's Manual
  1. Manuals
  2. Brands
  3. Harman Kardon Manuals
  4. Amplifier
  5. SIGNATURE 2.1
  6. Owner's manual

Harman Kardon SIGNATURE 2.1 Owner's Manual

Signature series 2.1 multichannel amplifier
Hide thumbs Also See for SIGNATURE 2.1:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
2.1 Multichannel Amplifier
Owner's Manual

Advertisement

Table of Contents
loading

Related Manuals for Harman Kardon SIGNATURE 2.1

Summary of Contents for Harman Kardon SIGNATURE 2.1

  • Page 1 2.1 Multichannel Amplifier Owner’s Manual...

  • Page 2: Table Of Contents

    Signature 2.1 Multichannel Amplifier Introduction ......... 1 Safety Information .

  • Page 3: Introduction

    They are your best sources of product information. You may also contact Harman Kardon via the World Wide Web at www.harmankardon.com Welcome to the Harman Kardon family. We wish you...

  • Page 4: Important Safety Information

    To ensure proper performance and avoid potential safety hazards, we recommend that it be connected to a circuit with 20-amp capacity. Connecting multiple amplifiers to the same circuit, or connecting the amplifier to a circuit used by other heavy-power devices, such as high-wattage lights, may cause circuit breakers to trip.

  • Page 5: Unpacking And Installation

    Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag. Signature 2.1 When positioning the amplifier in its final location, make certain that it has adequate ventilation on all sides, as well as on the top and bottom.

  • Page 6: Front And Rear Panels

    £ AC Power Cord: Connect this plug to a wall- mounted AC outlet. Due to the current draw of the Signature 2.1, it is NOT recommended that the accessory outlets on the back of the audio/video components be used to power this product.

  • Page 7: Installation And Connections

    Remote Turn-On Using an External AC-to-DC Converter If the 2.1 is not used with a compatible Harman Kardon product, it is still possible to activate the unit for automatic turn-on. To control the amplifier in this manner you will need a small UL/CSA approved class 2 AC-to-DC power converter capable of delivering a 6- to 12-volt DC signal.
  • Page 8 Do not overtighten or use tools, as this may damage the plastic terminal cap or break the delicate wire strands and decrease system performance. Signature 2.1 Important Note: When making speaker wire connec- tions, be certain that none of the strands from one lead touch any other lead.

  • Page 9: Operation

    The Signature 2.1 may be operated in either a manual or automatic mode. If the unit is being used in standalone operation you should follow the instructions below for Manual Operation. When the 2.1 is connected to another Signature Series product or to another compatible device, follow the instructions for Automatic Operation.

  • Page 10: Service Information

    If these solutions do not rectify the problem or if the problem recurs, contact your dealer or an authorized Harman Kardon service depot for assistance.

  • Page 11: Technical Specifications

    Signature 2.1 Multichannel Amplifier Specifications Power Output: High-Current Capability: Frequency Response: Power Bandwidth: THD/IMD: Crosstalk Negative Feedback: Input Impedance: Input Sensitivity: Remote Trigger Voltage: Remote Trigger Impedance: Dimensions (H x W x D): Weight: Power Requirements: 5 x 100 watts @ 8 ohms 20Hz –...
  • Page 12 Printed in the United States Part #1111-HKSIG21 HA160-0003-A...

This manual is also suitable for:

Sig2.1

Table of Contents