Table 29 Tightening Torques - ABB HT564586 Operation Manual

Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly
Screws for fastening the individual parts to
the filter silencer
Table 29: Tightening torques (filter silencer screws)
Tighten all screws of the bottom parts (01) and (02).

Tighten all screws of the side parts (03, 04, 07, 08) and the flanges (10, 11).

Tighten all screws of the circumferential parts (05, 06, 09).

Bellows
Figure 28: Fitting the bellows
Fit bellows (C) with frame (F), screws (S) and nuts (N) on the filter silencer casing.

© Copyright 2016 ABB. All rights reserved.
M10
30 Nm
Screws for fastening the individual parts
HZTL4034_EN
Page 64 / 111
M8
25 Nm
Revision F June 2016