Download Print this page

Toaster Functions - Sunbeam OBLIQ COLLECTION TAP3003 User Manual

4 slice long slot toaster

Advertisement

Features of your 4 Slice Toaster
7
6
5
4
1. 2 bread slots, 4 bread slices
2. Crumb tray (at rear)
3. Toasting lever, High-lift and
QuickCheck
TM
2
1
2
3
4. Browning control
5. Defrost button
6. Reheat button
7. Cancel button
Using your 4 Slice Toaster
Plug the toaster into a 230-240 volt AC
power outlet and switch the power on.
Toasting Bread
1. Position the bread into the bread slot.
2. Select the desired browning setting using
the Browning Control.
Note: If toasting 1 slice only, it is
recommended that you use a lower browning
setting to achieve your required result and to
prevent burning.
Important: Do not toast stale bread, rice
crackers or similar on a high setting as there
is a chance that they may catch fire.
3. Push the Toasting Lever down to
commence the toasting cycle.
4. When the desired browning is achieved,
the toaster will automatically stop toasting
and pop the toast up.

Toaster Functions

Cancel button
The Cancel button immediately stops any of
the toasting cycles. As a consequence of this,
the toast will pop up.
Reheat button
Press the toasting lever down and select the
Reheat setting to start the reheat cycle.
Defrost button
The Defrost feature can be used to toast
your frozen bread. The colour of your toast
will brown according to the toasting setting
you have chosen. This feature is activated by
pressing the defrost button on at any time
during the toasting cycle.
5. If you need to remove the toast before
the cycle is complete, press the Cancel
button. The Cancel button will immediately
interrupt the toasting cycle and pop the
toast up.
Hot Surfaces
Do Not Touch
This symbol indicates that the
temperature of accessible surfaces may
be high when the appliance is operating
and for some time after use.
High-lift lever
When toasting small pieces of bread,
crumpets or muffins we recommend using
the High-lift lever to prevent you from
burning your fingers.
QuickCheck
TM
If you need to quickly check the progress
of your toast without stopping the toasting
TM
cycle, use the QuickCheck
feature. Simply
lift up the toasting lever to view the toast and
then release when you have finished. If the
toast is ready press Cancel button.
3

Advertisement

loading

This manual is also suitable for:

Obliq collection tap3003whObliq collection tap3003blObliq collection tap3003gy