Motorola VM44 CONNECT User Manual page 21

5.3.3 Download the App
1. Scan the QR code with your smart device and download the Motorola
Nursery App from App Store for iOS devices or from Google Play™ Store
for Android™ devices.
2. Install the App on your device.
5.3.4 Sign up or log in to the App
1. Ensure that your smart device is connected to your Wi-Fi® router.
2. Follow the on-screen instructions to run and sign up or log in to the APP.
5.3.5 Add a camera to your account
1. Log in to the APP.
2. Tap Devices, and then tap
3. Tap (your baby monitor model's name) to add the new camera.
4. Select and enter the password of your Wi-Fi® network and then tap Next.
5. Power on the camera.
6. Press and hold
red.
7. Tap Continue on your device when you hear the voice prompt
pairing'.
8. Tap Generate QR code
in front of the camera to get scanned till you will hear a confirmation
message 'Pairing
Complete
9. Tap when it is successfully connected. It may take a few minutes
for the camera to connect to the Wi-Fi® network.
10. If connection fails, tap
Viewing the baby through your device
on the device screen to add a new camera.
PAIR at the bottom of the camera. The LED flashes blue and
on your device and hold the QR code 15 cm to 30 cm
success' from your device.
Retry
and repeat steps 1 - 10 in this section.
'Ready for
21