The port and slot configuration worksheet (Table 1) is used with Figure 17 to assist in planning and
documenting your use of the slots in a Cisco 7513, Cisco 7513-MX, or Cisco 7576 router. Figure 17
depicts the dual CyBus backplane, minus the time division multiplexing (TDM) connectors found
on the Cisco 7576.
Table 1
Port and Slot Configuration Worksheet (Refer to Figure 17)
Port
Slot 0
Slot 1
1
2
3
4
5
6
7
8
Router Name(s)
1
Slots 6 and 7 are reserved for the RSPs in the Cisco 7513 and Cisco 7513-MX. However, in the Cisco 7576, slot 6 is used for router A, and slot 7 is used for
router B.
Cisco 7513, Cisco 7513-MX, and Cisco 7576 Card Cage and Backplane Assembly Replacement Instructions