Mag-Bind® Total Pure NGS Table of Contents Introduction and Overview............2 Illustrated Protocol................3 Kit Contents and Preparations..........4 Storage and Stability..............4 Mag-Bind® Total Pure NGS 96-well Plate Protocol....5 Mag-Bind® Total Pure NGS 384-well Plate Protocol....8 Troubleshooting Guide.............11 Ordering Information..............12 Manual Revision: August 2016 Innovations in nucleic acid isolation...
Introduction and Principle Omega Bio-tek’s Mag-Bind® Total Pure NGS Kit allows rapid and reliable isolation of PCR products with high recovery rates. The system combines Omega Bio-tek’s proprietary chemistries with the reversible nucleic acid-binding properties of magnetic beads to selectively bind DNA fragments 100 bp and larger and eliminate excess nucleotides, primers, and small, non-targeted amplification products, such as primer dimers.
Illustrated Protocol Determine the Reaction size Add Mag-Bind® Total Pure NGS and Mix Magnetize and Remove Supernatant Wash Twice with 70% Ethanol Elute DNA...
Kit Contents and Preparations Kit Contents Product Number M1378-00 M1378-01 M1378-02 Mag-Bind® Total Pure NGS 5 mL 50 mL 500 mL User Manual Storage and Stability Mag-Bind® Total Pure NGS is guaranteed for at least 12 months from the date of purchase when stored at 2-8°C.
Mag-Bind® Total Pure NGS - 96-well Plate Protocol Mag-Bind® Total Pure NGS Protocol for 96-well Plates Materials and Equipment to be Supplied by User: • 96-well PCR plate containing PCR samples (up to 50 μL/well) • Magnetic separation device (Recommend AlpAqua Cat# 001322). For elution volumes <30 µL AlpAqua Magnum FLX (Cat#A000400) is recommended.
Page 7
Mag-Bind® Total Pure NGS - 96-well Plate Protocol Pipet up and down 5-10 times or vortex for 30 seconds. Let sit at room temperature for 5 minutes. Place the plate on a magnetic separation device to magnetize the Mag-Bind® Total Pure NGS. Let sit at room temperature until the Mag-Bind® Total Pure NGS is completely cleared from solution.
Page 8
Mag-Bind® Total Pure NGS - 96-well Plate Protocol 17. Let sit at room temperature for 5 minutes. 18. Place the plate on a magnetic separation device to magnetize the Mag-Bind® Total Pure NGS. Let sit at room temperature until the Mag-Bind® Total Pure NGS is completely cleared from solution.
Mag-Bind® Total Pure NGS - 384-well Plate Protocol Mag-Bind® Total Pure NGS Protocol for 384-well Plates Materials and Equipment to be Supplied by User: • 384-well PCR plate containing PCR samples (up to 100 μL/well) • Magnetic separation device for 384-well PCR plates •...
Page 10
Mag-Bind® Total Pure NGS - 384-well Plate Protocol Pipet up and down 5-10 times or vortex for 30 seconds. Let sit at room temperature for 5 minutes. Place the plate on a magnetic separation device to magnetize the Mag-Bind® Total Pure NGS. Let sit at room temperature until the Mag-Bind® Total Pure NGS is completely cleared from solution.
Page 11
Mag-Bind® Total Pure NGS - 384-well Plate Protocol 17. Let sit at room temperature for 2-3 minutes. 18. Place the plate on a magnetic separation device to magnetize the Mag-Bind® Total Pure NGS. Let sit at room temperature until the Mag-Bind® Total Pure NGS is completely cleared from solution.
Troubleshooting Guide Please use this guide to troubleshoot any problems that may arise. For further assistance, please contact the technical support staff, toll free, at 1-800-832-8896. Possible Problems and Suggestions Problem Cause Solution Increase the number amplification cycles Low PCR product yield for PCR Small PCR fragments normally give lower Smaller PCR product size...
Mag-Bind® Total Pure NGS (500 mL) M1378-02 Elution Buffer (100 mL) PDR048 HiBind®, E.Z.N.A.®, Mag-Bind®, and MicroElute® are registered trademarks of Omega Bio-tek, Inc. PCR is a patented process of Hoffman-La Roche. Use of the PCR process requires a license.