Osd Warning Message - Dell 210-BDFZ User Manual

OSD warning message

When the monitor does not support a particular resolution mode, you will see the following
message:
This means that the monitor cannot synchronize with the signal that it is receiving from
the computer. See
ranges addressable by this monitor. Recommended mode is 3840 x 2160.
NOTE: The message may be slightly different according to the connected
input signal.
You will see the following message before the DDC/CI function is disabled:
You will see the following message before the Lock function is activated:
NOTE: The message may be slightly different according to the selected
settings.
The current input timing is not supported by the monitor display.
Please change your input timing to 3840x2160, 60Hz or any other
monitor listed timing as per the monitor specifications.
Monitor specifications
The function of adjusting display setting using PC application will be
Do you wish to disable DDC/CI function?
Are you sure you want to lock the Menu Buttons?
To unlock the Buttons, refer to the User's Guide.
for the Horizontal and Vertical frequency
disabled.
Yes
No
Yes
No
Operating your monitor
│
61