LG RN1329A4S Owner's Manual page 16

Part 5 PROGRAMMING MODE -
Setup Mode :
You can change dryer vend price, cycle time, and cycle parameters, etc.
Entering set up mode
• Coin type - Turn on/off toggle switch.
• Card type - Insert the service card.
• Stack type - Take off control panel, and turn on/off toggle switch.
• OPL/Coin Type – Push "WHITES&COLORS" + "DELICATES" and the '3'.
• Then, dryer displays
1 1
How to change regular price.
Entering set up mode.
You will see LqC1
Note
• rgCP (regular cold price) is not available in dryer.
• rgrP (regular warm price) is not available in dryer.
• rgHP (regular hot price) is not available in dryer.
1 6
(display)
.
Press the WHITES & COLORS button.
Press the PERM. PRESS or the DELICATES
button until appears in the display.
Press the START button.
Press the START button.
Display previous regular price.
Press PERM. PRESS(+) or DELICATES(-) button to set
regular price.
(The vend price can be set from 0 to
Press the START button.
The machine sets up the regular price, then advances to the
next process automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type – Press "WHITES&COLORS" twice.
Setup Mode
Button
9.90 in 10p increments.)
Display