Front-Panel Information Display - Harman Kardon DVD 48 Owner's Manual

FRONT-PANEL INFORMATION DISPLAY

Disc-Type
NOTE: To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger copy may be downloaded
from the Product Support section for this product at www.harmankardon.com.
Disc-Type Indicators: The SACD, DVD, DVD-Audio, CD, VCD, MP3,
WMA or JPEG indicator will light to show the type of disc currently being played.
Audio Bitstream Indicators: When a Dolby Digital, DTS or Linear
PCM digital audio signal is detected, one of these indicators will light.
DVD-Audio, MP3 and WMA bitstreams will be indicated by the Disc-
Type Indicator.
Parental-Lock Indicator: This indicator lights in red when the
parental-lock system is engaged to prevent changing the rating level
without a code.
Program Indicator: This indicator lights when a playlist has been
programmed using the menu system (available for CDs only).
Angle Indicator: This indicator blinks when alternative viewing angles
are available on the DVD currently playing.
Random Indicator: This indicator lights when the unit is in the Random
Play mode.
A-B Repeat Indicator: This indicator lights when a specific passage
for repeat playback has been selected.
VCD Playback Control Indicator: This indicator lights when the
playback control function is turned on for VCDs.
Repeat Indicators: These indicators light when any of the Repeat
functions are in use.
Video OFF Indicator: This indicator lights in red when the unit's video
output has been turned off by pressing the Video OFF Button on the
remote control.
HDMI Indicator: This indicator lights when the HDMI Output is enabled.
Press the HDMI Button on the remote to toggle between turning the
HDMI Output on and off. When the HDMI Output is on (and this indicator
is lit), the Component Video Outputs are deactivated, and vice versa.
Video Resolution Indicators: One of these indicators will light to
indicate the current video resolution of the HDMI Output, based on what
your video display is capable of handling. The HDMI Output will upscale
source materials to the higher resolution, as indicated in the HDMI SETUP
menu (explained in the Initial Setup section). You may change the HDMI
Audio Parental
Bitstream
Lock
Group/Title
Playback Chapter/Track
Mode
Playback
Control
Random Repeat
Program
A-B
Camera
Angle Repeat Video Off
Video setting to a lower resolution to improve picture quality using the
VIDEO SETUP menu. As you select a specific HDMI Output video
resolution and the DVD 48 successfully determines that the video display
is capable of handling that resolution, its indicator will light and will appear
briefly in the Message Display.
Time Indicators: These positions show the running time of a disc in play.
NOTE: These positions will also display text messages about the DVD's
status, including Loading when a disc is loading, Power Off when the
unit is turned off, and Unknown Disc when a disc not compatible with
the DVD 48 is loaded.
Chapter/Track Number Indicators: When a DVD disc is playing, these
two positions show the current chapter. When a DVD-Audio, SACD or
CD disc is playing, they will show the current track number.
Group/Title Indicators: These two positions show the current title
number when a DVD disc is playing, or the current group for a DVD-
Audio disc.
Playback-Mode Indicators: These indicators light to show the current
playback mode:
› Lights when a disc is playing in the Normal mode. This indicator
will flash when the disc is in Forward Slow Play mode. The on-screen
banner display indicates the selected speed (1/2x, 1/4x, 1/8x or 1/16x).
›› When the DVD 48 is in the Fast Search Play mode, two of these
indicators will light to show that the unit is in a Fast Play mode. The
selection will be displayed on screen as one of six steps that correspond
to the following speeds: ~1-1/2x, 4x, 6x, 8x, 16x or 32x. Fast Play
mode is not available for WMA files.
± Lights when the disc is paused.
‹‹ Lights when the disc is in the Fast Search Reverse mode. The
selection will be displayed on screen as one of six steps that correspond
to the following speeds: ~1-1/2x, 4x, 6x, 8x, 16x or 32x. Fast Search
Reverse mode is not available for WMA files.
‹ Flashes when the disc is in Reverse Slow Play mode. The on-screen
banner display indicates the selected speed (1/2x, 1/4x or 1/8x).
HDMI
Video
Resolution
Time
11