Assembly And Installation - Skil BW9501-00 Owner's Manual

ASSEMBLY AND INSTALLATION

Loose Parts List (Fig. 2)
The following items are included with the band
saw:
No. Description
A Saw Table Assembly
B Miter Guide
C Hex Wrench, 2.5 mm
D Combination Tool
E Hex Wrench, 6 mm
F Flat Wrench, 7x10 mm
Phillips screwdriver
G Flat Washer
H Table Locking Knob
Tools Needed (Not Included) (Fig. 3)
Fig. 3
Adjustable wrench
Small Combination
Square
Combination square
UNPACKING
WARNING
list are not assembled to the product by the manufacturer and require customer installation.
Use of a product that may have been improperly assembled could result in serious personal
injury.
WARNING
parts could result in serious personal injury.
WARNING
is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING
Carefully lift the saw from the carton and place on a level work surface.
–
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
–
Do not discard the packing material until you have carefully inspected and satisfactorily
–
operated the tool.
Qty.
Do not use this product if any parts on the Loose Parts List are
already assembled to your product when you unpack it.
If any parts are damaged or missing, do not operate this product
until the parts are replaced.
Do not attempt to modify this tool or create accessories not
recommended for use with this tool.
Do not connect to power supply until assembly is complete.
comply could result in accidental starting and possible serious personal injury.
Fig. 2
1
1
1
1
1
1
G
2
2
Feeler Gauge
Use of this product with damaged or missing
A
C
H E
D
surface and examine it c
WARNING
!
●
To avoid injury from
or electrical shock, d
power cord into a so
unpacking and asse
remain unplugged w
adjusting/assemblin
●
The saw is heavy an
with care. If needed
someone to lift and
Any such alteration or modification
B
F
Parts on this
Failure to
13