Table of Contents
Advertisement
3. Disassembly and Reassemble
Description
4
Remove the ASSY COVER P-REAR.
5
Remove the Electric tapes shown on the
image.
•
EMI Point
paper from the LVDS Cable bottom,
attach the LVDS Cable to the C/
Chassis and rub the attatched
surface.
CAUTION
When assembling the TV, the electric
tapes must be applied on the same
locations.
Please remember to take a picture of
where the tapes were first applied.
6
Remove the Power Cables and Speaker
Cables.
Remove the LVDS Cable, Panel Wire
Cable and ASSY BOARD P-FUNCTION
ASSY Cable.
Remove the NETWORK (BT & WIFI)
Cable.
•
48" / 55" : BT/WIFI COMBO
•
65" : BT module/WIFI module
3-2
: After removing release
Picture Description
Filament Tape: EMI Point
Filament Tape: Dressing Point
Cable Dressing
Power Cable
Power Cable
Speaker Cable
LVDS Cable
LVDS Cable
ASSY BOARD
P-FUNCTION ASSYCable
NETWORK (BT & WIFI)
Panel Wire Cable
Cable
Screws
Advertisement
Table of Contents
