Lenovo T14 Gen 2 Hardware Maintenance Manual page 63

Table 10. System board connector and cable guide (continued)
Item
Connector (location)
Smart card reader connector
20
(internal)
Always On USB 3.2 connector
21
Gen 1 board connector (internal)
22
Thermal fan connector (internal)
23
Keyboard connectors (internal)
24
25
Nano-SIM-card slot (external)
* for selected models
System board connectors and cables (for Intel models with RFID)
Internal cable required
Smart card reader cable
Always On USB 3.2 connector Gen
1 board cable
Thermal fan assembly cable
Keyboard assembly cables
No
Cable connection
Connect one end of the cable to
the smart card reader and the
other end to this connector.
Connect one end of the cable to
the Always On USB 3.2 connector
Gen 1 board and the other end to
this connector.
The thermal fan assembly comes
with a cable. Connect the cable to
this connector.
The keyboard assembly comes
with the cables. Connect the
cables to these connectors.
Install a nano-SIM card into the
nano-SIM card tray. Then, insert
the tray with the card into this slot.
.
Chapter 6 Locations
57