Removing Sdram Dimms - Cisco 3600 Series Upgrade Instructions

Figure 2
0
1
Figure 3

Removing SDRAM DIMMs

To remove SDRAM DIMMs, follow these steps:
Attach an ESD-preventive wrist strap and ensure that it makes good contact with your skin. Connect the
Step 1
equipment end of the wrist strap to the metal back plate of the chassis, avoiding contact with the
connectors.
On the mainboard, locate SDRAM DIMM sockets 0 and 1. (See
Step 2
OL-5423-02
SDRAMM DIMM Locations in the Cisco 3725 Router
SDRAM DIMM Orientation in the Cisco 3725 Router
Polarization notches
Alignment holes
Upgrading System Memory in Cisco 3725 Routers
Connector edge
Figure 2.)
Upgrading System Memory in Cisco 3700 Series Routers
13