DigiTech Bass Whammy Owner's Manual page 5

1. Expression Pedal
This pedal is used to control the pitch bending amount of the selected Harmony,
Whammy, or Detune e ect. Rocking it forward (toe down) increases the amount of pitch
bending while rocking it back (toe up) decreases the amount of pitch bending.
2. Harmony LEDs
One of these LEDs will light when a Harmony e ect is selected. Harmony e ects have dry
signal added to the e ect signal.
3. Classic/Chords Switch
This switch toggles between the classic Whammy algorithm (Classic) and modern chordal
algorithm (Chords). The Classic setting is ideal for single note play while the Chords
setting is best suited for bending of full chords.
4. Selector Knob
This knob is used to select one of the Whammy, Harmony, or Detune e ects.
5. Whammy LEDs
One of these LEDs will light when a Whammy e ect is selected. Whammy e ects do not
have dry signal added to the e ect signal.
6. Detune LEDs
One of these LEDs will light when a Detune e ect is selected. The Expression Pedal
controls the amount of Detune signal mixed with the dry signal.