Stopwatch; Count-Dowm Timer - Haier M1000 User Manual

to continue with the calculation, you can enter
an operator and use the result of the first
operation as the first operand.
The Left Softkey allows you to perform the
following operations: Options menu includes:
Clear, MC, MR, MS and M+. In which,
Clear: To clear the editing window of the
calculator and restart input. (It will not affect
the contents stored in the memory.)
MC:MC: Memory Clear: To clear the number
stored in the memory.
MR: Memory Read: To recall the number
stored in the memory without erasing it from the
memory.
MS: Memory Store: To store the displayed
number in the memory.
M+: Memory Plus: To add the displayed number
and the number stored in the memory and store
the sum in the memory.
You can enter an operand with most 10 digits in
the edit window.

3.5.4 Stopwatch

The screen displays the start time as 00:00.0.
Once the [Start] soft key is pressed, the watch
starts and the soft key changes to [Pause] and
[Clear]. You can press the [Pause] soft key to
temporarily stop the watch and keep its current
reading, and then press the [GO] soft key or
[OK] key to resume and continue the timer. You
press [Clear] soft key to reset the stopwatch
reading to zero.
3.5.5 Count-down timer
This timer has a function similar to that of the
alarm clock but it alerts you when the preset
remaining time is reached. Once this feature
is set to "ON", the phone opens an editor for
you to enter how much time is left before it
gives you an alert.
Note: The count-down timer will automatically
switch on the phone to alert you even if the
phone is switched off.
69