Page 1
USER MANUAL SETUP GUIDE RS-TOUCH SERIES EME1LCD IN-SESSION ALERTWERKS COMMON LCD DISPLAY SETTINGS 24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM 24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM...
CHAPTER 1: INTRODUCTION SUPPORT 1.877.877.2269 1.1 INTRODUCTION The EME1LCD plugs into any AlertWerks Plus wired gateway and can be programmed to display the data from other physical and virtual sensors. FIGURE 1-1: SENSOR INFORMATION SCREEN 1.1.1 FEATURES: EASY TO READ, HIGH QUALITY BACKLIT LCD DISPLAY ...
Page 3
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 CHAPTER 1: INTRODUCTION TECHNICAL SUPPORT 1.877.877.2269 1.1.2 DISPLAYING THE IP ADDRESS: When the LCD Sensor is plugged into the unit the first time, or if the Reset button is pressed once on the base unit, it will display the unit’s IP address (by digits, one at a time).
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL CHAPTER 2: SENSOR CONFIGURATION SUPPORT 1.877.877.2269 2.1 SENSOR CONFIGURATION Plug in the sensor using an available sensor port. Then open the base unit’s Web UI and navigate to the Sensors list, as shown in Figure 2-1.
Page 5
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 CHAPTER 2: SENSOR CONFIGURATION TECHNICAL SUPPORT 1.877.877.2269 Now you can define the display rotation list that will be displayed on the LCD. The Primary Rotation List, shown in Figure 2-2, is what will be normally displayed on the screen. FIGURE 2-2: PRIMARY LCD ROTATION LIST SCREEN 1.877.877.2269 BLACKBOX.COM...
Page 6
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL CHAPTER 2: SENSOR CONFIGURATION SUPPORT 1.877.877.2269 Click on the “Add” button, as shown in Figure 2-3, and add a sensor for which you want a status displayed on the LCD. Repeat, as needed.
Page 7
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 CHAPTER 2: SENSOR CONFIGURATION TECHNICAL SUPPORT 1.877.877.2269 For each sensor, you can define the duration of the display, as shown in Figure 2-4, before it will switch to the next sensor status display.
Page 8
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL CHAPTER 2: SENSOR CONFIGURATION SUPPORT 1.877.877.2269 The preview screen, shown in Figure 2-5, will show you how the configured display will look like, with the actual sensor reading and status value. The small index counter on the top right corner of the LCD screen shows the sensor’s order number in the list.
Page 9
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 CHAPTER 2: SENSOR CONFIGURATION TECHNICAL SUPPORT 1.877.877.2269 There is also a Critical Rotation List configuration, shown in Figure 2-6, which will be used when one of the monitored sensor’s status is in a warning or critical state. IMPORTANT: The Critical Rotation List will override the Primary Rotation List if a sensor’s status is warning or critical, and it will only display those sensor statuses.
Page 10
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL CHAPTER 2: SENSOR CONFIGURATION SUPPORT 1.877.877.2269 2.1.1 BUILT-IN TEMPERATURE SENSOR The LCD Sensor’s built-in Temperature Sensor is selectable from the same sensor port. Its configuration, shown in Figure 2-7, is the same as the standard Temperature Sensor’s configuration, and it can be used by notifications.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL CHAPTER 3: LCD DISPLAY SENSORS SUPPORT 1.877.877.2269 3.1 LCD DISPLAY SENSOR TYPES Switch type sensors that have no unit values are displayed as a sensor type. The following list provides a definition of the sensor mapped to a specific sensor type.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL CHAPTER 4: LCD DISPLAY SUPPORT 1.877.877.2269 4.1 EXAMPLES OF LCD DISPLAY PROGRAM Through the AlertWerks Wired web interface the LCD display is programmed to display the sensors that you wish to view and the sequence in which they are displayed.
Page 13
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL CHAPTER 4: LCD DISPLAY SUPPORT 1.877.877.2269 4.2 GLOBAL STATUS LEDS The LCD Sensor has two specific status LEDs (yellow and red), which will light up and blink if a monitored sensor’s status is warning or critical, respectively.
Page 14
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL CHAPTER 4: LCD DISPLAY SUPPORT 1.877.877.2269 FIGURE 4-4: ANOTHER EXAMPLE WITH LED LIGHTS OFF FIGURE 4-5: EXAMPLE OF SENSOR IN WARNING STATE (YELLOW LED BLINKING) 1.877.877.2269 BLACKBOX.COM...
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 CHAPTER 5: TECHNICAL DRAWING TECHNICAL SUPPORT 1.877.877.2269 5.1 TECHNICAL DRAWING FIGURE 5-1: TECHNICAL DRAWING 1.877.877.2269 BLACKBOX.COM...
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 CHAPTER 6: SPECIFICATIONS TECHNICAL SUPPORT 1.877.877.2269 TABLE 6-1. SPECIFICATIONS SPECIFICATION DESCRIPTION Power Input TYPICALLY 45MA, 0.22W Power Consumption < −80dB@0dBFS 1kHz (A-wt) Continuous embedded temperature display Display up to 8 sensors in standard rotation list, configured via SP+ web interface with preview ...
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 CHAPTER 1: HEADLINE TECHNICAL APPENDIX A: REGULATORY INFORMATION SUPPORT 1.877.877.2269 A.1 FCC STATEMENT This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 18
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 CHAPTER 1: HEADLINE TECHNICAL APPENDIX A: REGULATORY INFORMATION SUPPORT 1.877.877.2269 A.4 NOM STATEMENT 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2.
B.1 DISCLAIMER Black Box Corporation shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Corporation may revise this document at any time without notice.