Panasonic KX-TG2583B Service Manual page 54

NOTE:
Refer to Handset Reference Drawing
source and voltmeter.
9.5. Base Unit Reference Drawing
9.6. Handset Reference Drawing
9.7. Frequency Table
10. DESCRIPTION
10.1. Frequency
The frequency range of 2.4015 GHz ~ 2.4705 GHz is used. Transmitting and receiving channel
between base unit and handset is same frequency. Refer to the Frequency Table.
10.2. Time Division Duplex (TDD) operation
Transmission/reception between the base unit and handset is performed by time-sharing as
shown in Fig. 7. 1 slot time of transmission and reception is 1mS.Same frequency is used in
transmitting and receiving. The figure shows an example; the frequency of 1ch is used in
transmitting between the base unit and handset.
for connection of DC power
Fig. 7
54