Audiovox Prestige Platinum+ APS-25N Installation Manual

Note : When both Passive Arming and Voltage Sensing are selected, you must hardwire the driver's door pin switch
in order to begin the passive arming sequence.
RF Programmable Features :
Feature Selection
1st Door L/UL
2nd Accy Lock
3rd Accy. UL
4th Passive Locks
5th Passive/Active Arm
6th Voltage Sense
To program these selectable features;
Turn ignition on No response
Press and release the valet switch 3 times
Within 3 seconds, turn ignition Off
First Then On
Press transmitter Lock button to change
Press transmitter Lock button to change
Second Press and release the valet switch
Press transmitter Lock button to change
Third Press and release the valet switch
Press transmitter Lock button to change
Fourth Press and release the valet switch
Press transmitter Lock button to change
Fifth Press and release the valet switch
Press transmitter Lock button to change
Sixth Press and release the valet switch
Press transmitter Lock button to change
Turn ignition key off
Note: Once you enter the feature programming mode, do not allow more than 30 seconds to pass between steps, or the
programming will be terminated.
1 Chirp 2 Chirps
1 Sec. 3.5 Sec.
Auto Lock On Auto Lock Off
Auto UL On Auto UL Off
Passive Active
Passive Arm Active Arm
Voltage Sense Hardwire
Action
o r
o r
o r
o r
o r
o r
Model APS-25N
Installation Manual
3 Chirps 4 Chirps
1 Sec L, Dbl. U/L
System Response
1 Chirp - LED 1 flash
Short chirp, then long chirp
1 chirp = 1 second door locks
2 chirps = 3.5 second door locks
3 chirps = 1 sec. lock, dbl 1 sec. unlock
2 chirps = auto locks off
1 chirp = auto locks on
2 chirps = auto unlock off
1 chirp = auto unlock on.
2 chirps = active locks
1 chirp = passive locks
2 chirps = active arming
1 chirp = passive arming
2 chirps = hardwire
1 chirp = voltage sense
Exit program mode
Default
1 Sec.
Auto Lock Off
Auto UL Off
Active
Active Arm
Hardwire
128-8534
1 of 8