This diagram may vary slightly with the layout of the washing machine you have just purchased due to technical inprovements. Electronic system diagram Table cover interference eliminator Washer door A:heater1 Drainage hose clip D:low speed winding of motor E:high speed winding of motor Packing bolt(3) G:water inlet electromagnetic valve for pre-washing...
Warning 1.If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. 2.If a stationary appliance is provided, with a supply cord and a plug, the instructions shall state that the appliance must be positioned so that the plug is accessible.
Page 4
Matters needing attention 8.The washing machine must not be used in 9. The washing machine should be placed the open or in an area of high humidity as in a well-ventilated area, leaving a space water droplets may form on the electrical between the appliance and adjacent walls or components.
Page 5
Warning code Warning Abnorma item Content of identification Action to take code The water level can not Warning and reach the reset water stop running level within 5 minutes Water supply The water level can not Warning and reach the setting water stop running level within 8 minutes The water level can not...
Installation As shown in Fig.1, remove all the packing materials ( in cluding the foam base ). It is normal that there are some water drops on the plastic bag, the cushion and the porthole. It is because of the water testing before leaving the factory.
Page 7
Additional information Tips Adding the soften agent can help the laundry to get rid of the static electricity and make the cloths feel softly and easy to iron. The following list shows the drying time for the different quantity and kinds of the laundry.
Control panel A. POWER ON/OFF Touch this button to swith on the power if the machine is not on power, and touch this button to switch off the power if the machine is on power. B. PROGRAM Touch this button then you can select the washing programs as you wish from top to bottom in proper order.
Preparations Power supply Water supply Plug in the power supply Turn on the tap ensure that the 220V/50Hz water is clear. Caution: Before starting the washing machine turn on the water faucet to ensure that the water faucet and the water inlet hose are connected correctly and do not leak.
Program selection Program Suitable Option Quantity Wash ( min ) name condition Default add 12 minutes Prewash for dirty cloth below 5 kg washing wash/rinse below 5 kg /spin wash/rinse ordinary cloths Standard below 2.5 kg /spin/dry washing wash/rinse below 1 kg /spin/dry wash/rinse self defined...