Advertisement
Quick Links
INSTRUCTION MANUAL
40" 1080p LED TV
SQ4005M
AIR/CABLE MODE SELECTION
The Air/Cable menu option is set to the "Air" mode at the factory so that you
can receive the over-the-air broadcast signal. If you want to receive the Cable
TV signal through the antenna input terminal, this menu option must be switch
to the "Cable" (Cable TV) mode. Please refer to page 14 of this manual for the
details of the menu.
Advertisement
Related Manuals for Quasar SQ4005M
Summary of Contents for Quasar SQ4005M
- Page 1 INSTRUCTION MANUAL 40” 1080p LED TV SQ4005M AIR/CABLE MODE SELECTION The Air/Cable menu option is set to the “Air” mode at the factory so that you can receive the over-the-air broadcast signal. If you want to receive the Cable TV signal through the antenna input terminal, this menu option must be switch to the “Cable”...
-
Page 2: Table Of Contents
Contents z Introduction z Warning z Caution z Main Unit Description z Remote Control z OSD Basic Adjustment z Specifications Troubleshooting... -
Page 3: Introduction
Introduction Thank you for purchasing QUASAR HD LED Television. To get the most out of your new purchase, it is highly recommended that you read this manual before starting the operation. INSTALLATION Locate the receiver in the room where direct light does not strike the screen. -
Page 4: Warning
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL . This symbol is intended to alert the user to avoid the risk of electric shock. -
Page 5: Caution
Caution Caution High voltages are used in the operation of this product. Do not open the product's casing. Refer servicing to qualified service personnel . Caution To prevent fire or electrical shock hazard, do not expose the main unit to rain or moisture do not place objects filled with liquids, such as vases, on the apparatus. - Page 6 Caution Caution Never stand on, lean on or suddenly push the product or its stand. You should pay special attention to children. Caution Do not place the main unit on an unstable cart stand, shelf or table. Serious injury to an individual and damage to the television may result if it should fall.
-
Page 7: Main Unit Description
Main unit description Control Panel Button Function VOL+ : Volume up. VOL- : Volume down. CH+ : TV channel up. CH- : TV channel down. MENU : Press to select the main menu. SOURCE : Select the input sources. POWER : Switching Power On/Standby. TV Terminal Connections 1. -
Page 8: Remote Control
Remote control POWER: Power on/off button, press once to turn the TV on and press again to turn the TV off. MUTE: Press this button to mute or restore sound. In the TV condition, press this key to select the stereo mode. MTS: ASPECT: Press to adjust picture ratio. - Page 9 Instruction for Wall Mount Quasar 400mm x 200mm Quasar...
- Page 10 Installation Guide Press MENU button to display the MAIN OSD MENU; Press button to select the MENU you want; Press ENTER button to enter the sub menu; Press button to select the option and then press to adjust the value in the sub menu; You can press MENU button to go back to the upper menu or EXIT button to close the OSD.
- Page 11 “Aspect Ratio” and press the “ / ” button to select. Press “ / ” button to select “Noise Reduction” and press the “ / ” button to select. Press “ / ” button to select “Dynamic Contrast” and press the “ / ” button to select “On” or “Off”.
- Page 12 4. Press “ / ” button to select “Time Format” and press the “ / ” button to select “12-hour” or “24-hour”. Press “ / ” button to select “Auto Clock” and press the “ / ” button to select “On” or “Off”.
- Page 13 (e). Press “ / ” button to select “Font Edge Color” the “ / ” button to adjust. (f). Press “ / ” button to select “FG Color” the “ / ” button to adjust. (g). Press “ / ” button to select “BG Color” the “ / ” button to adjust. (h).
- Page 14 select time zone. d. Press “ / ” button to select “Daylight Saving Time” and press the “ / ” button to select “On” or “Off”. e. Press “ / ” button to select “Time Format” and press the “ / ” button to select “12-hour”...
- Page 15 “ENTER/ ” Password”, then press button to adjust the value. If the password is changed, all of the passwords in the menu will be changed at the same time. Note : If you forget your password, you can use “1470” to enter any menu locked. “ENTER/ ”...
- Page 16 Channel Press the “MENU” button to enter the OSD menu .Then press “ / ” button to select the “Channel” menu. Press “ ” button to select “AIR/CABLE” and press the “ / ”button to select Cable or AIR. 2. Press “ / ” button to select “Auto Scan” ENTER/ and press the “...
- Page 17 PC Setting Press the “MENU” button to enter the OSD menu .Then press “e/f” button to select the “Setup” menu. And then press “d” button to select “PC Setting” and press the ENTER/f “ ” button to enter sub-menu. 1. Press “c/d” button to select “H-Pos” and press the “ ”...
- Page 18 Media OPERATION SOURCE...
- Page 19 Photo Menu...
-
Page 20: Specifications
SPECIFICATIONS SQ4005M Viewing Picture Size(diagonal) 39.5 inches Resolution 1920x1080 Aspect Ratio: 16:9 TV System: ATSC Digital system and NTSC Analog system Video Signal System: NTSC Receiving Channel: Cable :1-135/ Air: 2-69(ATV&DTV) Maximum Power Consumption: Input Power Voltage: AC 100-240V Audio Output Power(THD... - Page 21 Before consulting service personnel, check the following chart for possible solutions. PROBLEM SOLUTION Make sure the power cord is plugged in. The batteries in the remote control may be Exhausted; replace the TV will not turn on batteries. Check the cable between TV and antenna/ external AV device.
- Page 22 Quasar is a registered trademark of Panasonic Corporation of North America in the U.S. and Canada, and Panasonic Corporation in other counties. All rights reserved. This product is manufactured under license by VARIETY PRODUCTS. Any Liability to Quasar television products, including design and quality, is the sole responsibility of VARIETY PRODUCTS.