Assembly
The 72in. Tool Chest is designed to t on the Husky Heavy Duty 72 in. 15-Drawer Mobile Workbench:
Model# H72MWC15DL
Model# H72MWC15RDL Sku# 1003399496
Before installing this chest to another work surface, please refer to the Owner's Manual for proper dimensions and loading
requirements.
1
Attaching Plastic Feet (Optional)
NOTE: 6 Plastic Feet are located in bag
found in top till.
□
Insert the Plastic feet (C) into the 6 holes at the bottom the chest (A).
□
The Plastic feet (C) will help protect the surface of the workbench. There will be a small gap between the bottom of the
chest (A) and the surface of the workbench.
2
Installing the Chest onto the Workbench
CAUTION:
□
Place the top chest (A) on top of the 72in. Mobile Workbench (sold separately) or other suitable workbench and align
the back to be ush.
□
Align the Bracket (B) over the threaded holes in the Chest (A) and mark the screw hole locations in the workbench.
□
Using a power drill and 7/64 in. drill bit, carefully pre-drill the 2 holes per bracket in the workbench. Be CAREFUL to
only drill through the sheet metal and not into the contents of the workbench, with a maximum drill depth of 1/2 in.
□
Attach the two brackets (B) over the holes at back of the product and secure each Bracket with 2 Bolts (AA) in the Chest
and 2 Screws (BB) in the workbench.
Sku# 1003399495
Do not over tighten the bolts.
6
23"
23"