Assembly
Two people are recommended for assembly.
CAUTION:
1
Attaching the cabinet handle
□
Position the cabinet handle (B) over the holes on the
cabinet (A).
□
Attach with the bolts (BB) and tighten with supplied
hex key
(CC).
There are holes to mount handle on either side
NOTE:
of cabinet, but only one handle is provided.
3
Attaching the bottle opener
□
Position the bottle opener (C) over the holes on the
cabinet (A).
□
Attach with the bolts (BB) and tighten with supplied
hex key (CC).
Do not over tighten the bolts.
CAUTION:
BB
B
A
BB
C
A
after removing the wood pallet and all
CAUTION:
packaging, use the hex key (CC) or a 12mm socket
wrench to tighten all 16 caster bolts, which may have
become loose during shipment.
2
Attaching the storage hook
□
Position the storage hook (D) over the holes on the
cabinet (A).
□
Attach hook (D) using bolts (BB) and tighten with
supplied hex key (CC).
Do not over tighten the bolts.
CAUTION:
A
4
Installation of Power Cord
□
Untie power cord located inside drawer.
□
Gently pull cord plug through grommet.
6
D
BB