Table of Contents
Advertisement
Available languages
Available languages
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Nozzle (Fig. A)
If the nozzle becomes clogged with foreign materials,
such as dirt, excessive pressure may develop. If the
nozzle becomes partially clogged or restricted, the pump
pressure will pulsate. Clean the nozzle immediately using
the nozzle cleaner.
1. Shut OFF the pressure washer unit
water supply.
2. Pull trigger
7
on spray handle
water pressure.
3. Remove the nozzle from the spray wand
the quick connect collar
4. Using the spray tip cleaning tool, unclog any debris from
the nozzle.
5. Run water from a faucet or garden hose through
the nozzle.
Soap Bottle (Fig. A, H)
Remove the soap bottle
turning the soap bottle counterclockwise and pulling it out
of the spray handle. Unscrew the soap bottle applicator
Rinse and empty the soap bottle
Fig. H
8
and turn OFF the
4
to relieve any
2
by pulling
3
toward the spray wand.
13
from the spray handle
13
completely.
Storage (Fig. I, J)
•
Before moving the pressure washer for storage, refer to
Moving the Pressure Washer under Operations .
•
Store in a dry, covered location above freezing
temperature. sTORE inDOORs.
•
Always completetely empty water from high pressure
hose, pressure washer unit, spray wand, nozzles, soap
bottle, and pressure wand handle.
•
40° white nozzle
on the back of the pressure washer unit
•
Wrap up the cord around the power cord storage
Fig. I
20
Fig. J
4
by
21
.
21
Accessories
WARNING: Since accessories, other than those
offered by CRAFTSMAN, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
CRAFTSMAN recommended accessories should be
13
used with this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN call 1-888-331-4569.
and turbo nozzle
18
19
8
18
20
English
can be stored
.
20
.
19
7
Advertisement
Table of Contents
