Select Water Level; Press The Power Button; Select Program - Distar DWE-3105A User Manual

5 Select water level

WATER LEVEL
HIGH
MEDIUM
RESET
LOW

6 Press the POWER button

Using this button to switch on or off the power. When the power is on ,
the relevant indicator light will be lighted.
When the washing is over , it will switch off the power automatically.

7 Select program

Circumvolve this knob, the following programs can be
selected solely: wash, strong, stanard, gentle, spin
Mode and meaning of the indicator light
The frame of indicator is not lighted.
the frame of the indicator is flashing : indicate the running program.
the frame of the indicator is on : indicate the program about to run,
or indicate the selected mode
the frame of the indicator is flashing rapidly: indicate abnormal condition.
Paraphrase of the program
Program
Wash Just washing , the water can be usedrepeatedly.
Strong Including soking, it is the same with the very dirty clothing.
Standard The common washing
Gentle
Washing woolen textile or underwear
Spin Only needing spining after washing with hands
Three water levels available according to the laundries quantity:
High; Medium; Low.
After the water inlet as per the preset water level, in case
additional water quantity is required, please first set the button
to the "RESET", and perform automatic water inlet. When it
reaches the suitable water level, you can turn it to the preset
water level.
After the water inlet under set water level, if higher water level is
needed, please first turn the knob to " Reset ", then turn back to
needed water level. The washing machine will fill water to the
new water level automaticly.
the occasion
Using process Using process
WATER LEVEL KNOB
Page 8
total time (min)
About 6 not including inleting water
About70 not including inleting water
About40 not including inleting water
About23 not including inleting water
About7 not including draining water