Cisco 12006 series Product Overview page 39

Chapter 1 Product Overview
Figure 1-12
1
1
2
3
Depending on whether the router is configured for nonredundant or redundant
power operation, the router ships with either one or two 14-foot (4.3-m) AC power
cords to connect the PDU to the facility AC power source. AC power cords with
different source AC power plugs are available. (See
For true redundancy, connect each power supply to a separate power circuit
Note
protected by its own circuit breaker.
OL-11497-03
AC Power Distribution Unit
3
Captive screw
AC power cord receptacle A
AC power cord receptacle B
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
4
5
6
4
AC power distribution unit
5
Guide pin
6 Blower module connector
Figure 2-3 on page
Power Subsystems
2
2-15.)
1-39