Table of Contents
Advertisement
Display
The display is structured so that the information can be
read at a glance in any situation.
The value that you can currently set is highlighted in
white text in the display. The value in the background is
displayed in gray text.
Focus
The highlighted value can be changed
immediately without first being selected.
After starting an operation, either the
temperature or level remains high-
lighted. The white line also serves as the
heating line and gradually turns red.
Enlargement
As long as you use the rotary selector to
change the highlighted value, only this
value will be displayed larger.
Display ring
The display ring can be found around the outside of the
display.
If you change a value, the display ring shows you where
you are in the selection list. Depending on the settings
area and length of the selection list, the display ring may
be continuous or divided into segments.
During operation, the display ring turns red at second-
long intervals. After every full minute, the segments turn
red again from the beginning. As the cooking time
counts down, one segment disappears every second.
Temperature display
After the operation has started, the current cooking
compartment temperature is displayed graphically on the
display.
Heating line The white line under the temperature
turns red from left to right as the cooking
compartment heats up. When you are
preheating the appliance, the optimal time
to place the food in the cooking compart-
ment is when the line has completely
turned red, and a beep indicates that pre-
heating is complete.
For set levels, e.g. the broil setting, the
heating line turns red immediately.
Residual
When the appliance is switched off, the
heat indica-
display ring shows the residual heat in the
tor
cooking compartment. As the residual
heat cools down, the display ring
becomes darker and disappears com-
pletely at some point.
Note: Due to thermal inertia, the temperature displayed
may be slightly different to the actual temperature inside
the oven.
Touch-screen displays
The touch-screen displays are both a display medium
and control element at the same time. They show the
options that you can select for a function and the current
setting. To select a function, simply touch the text field
directly.
The function currently selected is identified by a red
vertical bar next to it. Its corresponding value is
highlighted in white on the display.
The small red arrow next to the text field shows the
functions to which you can scroll forwards or backwards.
Operating modes
Your appliance has various operating modes that make
your appliance easier to use.
You can find more precise descriptions of these in the
corresponding sections.
You can open the "Operating modes" menu by pressing
the menu field.
Operating mode
Heating modes
~ "Operation"
on page 15
Assist
~ "Dishes"
on page 34
EcoClean
~ "Cleaning function"
on page 24
Home Connect Assis-
tant
~ "Home Connect
"
®
on page 21
Basic settings
~ "Basic Settings"
on page 19
--------
Use
There are various finely tuned
heating types for the optimal
preparation of your food.
For many dishes, there are
preprogrammed setting val-
ues.
The cleaning function cleans
the cooking compartment
almost by itself.
This function allows you to
connect your oven with a
mobile device.
You can change your appli-
ance's basic settings to suit
your needs.
11
Advertisement
Table of Contents
