Getting Started
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small
amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
Initial Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP
button.
Setup
is available only when the source is set to TV.
✎
If you connect any device to HDMI IN 1(STB) before starting the installation,
automatically. If you do not want to select
If You Want to Reset This Feature...
Select
System
-
Setup
(Initial Setup). Enter your 4 digit PIN number. The default password is "0-0-0-0". If you want to
change the PIN number, use the
You should do
Setup
(MENU
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which
resets the PIN to "0-0-0-0":
Set-top
box, please select Aerial.
Change PIN
function.
→ System) again at home even though you did in shop already.
→ 8 → 2 → 4 →
MENU
English - 15
Channel Source
POWER
(on)
will be changed to